SO68112212ABS STAND OFF ADJUSTABLE ROUND 2-1/4″ DIA

View cutout/template by clicking below button

ADJUSTABLE ROUND STANDOFF 2-1/4″ DIA & HEIGHT 1-5/16″ TO 2″ BRUSHED STAINLESS 304 TO PC BLACK FINISH

*Comes with 1 alen key to tighten the Cap.

1.1              SYSTEM DESCRIPTION

A.    Performance Requirements for Guard Assembly:

1.      Support distributed load of 50 pounds per linear foot (0.73kN/M), applied horizontally at right angles in any direction to the top/grab rail.

2.      Support concentrated horizontal load of 200 pounds (0.89kN), applied in any direction at any point along top/grab rail.

3.      50 lbs (0.22kN) on 1 sf (0.093m²) perpendicular to guard at any location

4.      Wind loads 25 PSF or as otherwise specified.

5.      These loads need not to be assumed to act concurrently.

6.      Maximum deflection at top of glass is height/24.

1.2          QUALITY ASSURANCE 

A.    Components and installation are to be in accordance with state and local building codes.

B.     All glass to be fabricated by an approved temper glass company to a tolerance of 1/32” for the light size and hole locations.

 1.3          DELIVERY, STORAGE, AND HANDLING 

1. Deliver materials properly protected against damage to finished surfaces during transit.
2.  Inspect materials upon delivery for any damage. Unless minor defects can be made to meet the Architect’s specifications and satisfaction, damaged parts shall be removed and replaced.
3. Store materials at building site under cover in a dry location.

Please click view for more details about gasket diameter & hole cut out